Toyota Tacoma Tailgate Insert

Designed for recreation and adventure, the AL Offroad Trailgate™ Panel brings utility to a previously useless plastic space. (PATENT PENDING)

Known Functions: Field Project Space, Camp Table, Flat Platform For Air Mattress, Knee-Saver (Huge Plus), and Tailgating / Entertaining / Drinking

Engineered and manufactured with worry-free use in mind, we are ready to see what you use your Tailgate Insert for!

The OG ( Engraved Finish Logo )

Onyx ( Black Logo )

MADE IN THE USA / MADE IN TEXAS

• Fits Toyota Tacoma 05-Current
• 1/8” Aluminum RUST-PROOF
• Textured Powdercoated Finish
•  AL Offroad Trailgate™ logo
• Two Deep Marine-Grade Cup Holders
• OEM Fitment
• **Note** This product is slippery when wet.
• Trailgate Lead Time is Roughly 2-4 weeks after order is placed

AL Offroad Wumbo Nuts

These T-nuts are an easy way to mount your accessories to the crossbars. These specific T-nuts fit into our Bigger crossbars for our FJ Cruiser, 4th & 5th Gen 4Runner racks.

All of our hardware is stainless steel so no need to worry about rust.

     Included With Track Nuts

• 4 Track Nuts
• 4 Lock Washers
• 4 Washers

     Mounting Brackets

• Awning Mounts
• Antenna Mounts
• Traction Board Mounts

Tacoma Roof Rack

          The OG: Unfinished logos with stainless steel hardware

          Onyx Edition: Black logos with black stainless steel hardware

• The ultralight aerodynamic design remains noise-proof (up to 80 mph in a headwind rainstorm)
• Rust Proof! All racks are composed of a high strength Aluminum with matching brackets and stainless steel bolts
• Notched for multiple tie-down opportunities.
• Slotted for incredible adjustability and aftermarket accessory compatibility.
• Strong enough to mount your trail equipment without failure.
• Toyota Tacoma Roof Racks Lead Time 6-8 weeks after order is placed
• For custom colors contact us via email

Ensure you’re ready for your next adventure or campout by installing a quality Toyota Tacoma Roof Rack.

Awning Brackets

  Our awning brackets will be a great addition to your roof rack. Allowing mounting to a wide majority of awnings

• Awning Brackets
• Hardware included for installation on our roof racks
• Sold in pairs
• Powder coated

X6S Slim Amber/White Light Bar & Harness

There's plenty of reasons to buy your amber white light bar from Extreme LED. One of those reasons is that we provide you with options that you can't find anywhere else. You can fulfill your need for variety with this amber white LED light bar! The new X6S 5-watt series amber white LED Light bar offers you the choice between amber and white lights. You can also use the two together! You can use just the white LED light bar for extra lighting at night, the amber led light bar for extra contrast (great for fog and snow), or combine the white and amber for maximum light and visibility!

A few things to expect when purchasing this amber white light bar regarding height:

• It is 1-5/8" tall, and the light from mounting point to mounting point is 44-1/5" wide.
• The mounting feet holes vary - the outward mounting feet of the single LED light bar is 45-9/16," and the inward mounting feet are 42-4/5".

The applications for this amber white LED light bar are endless. Whether you're out in the country going mudding with your buddies at night or going for an early morning hunting excursion. Extreme LED has the right equipment shine light to your path.

We understand you need a reliable amber white LED light to guide the way without costing a ton. We keep you in mind when it comes to pricing. We don't want you to have to break the bank just for quality lights.

With high-quality aluminum construction, IP68 rating to keep dust and water out, and rugged powder coating, our lights will take you wherever your journey may take you and whatever abuse you throw at it. 

Includes:

• Amber White Light Bar
• Wireless Remote
• Universal mounting brackets (scroll through product images to see)
• Wiring Harness for independent white and amber light control (has two switches, one for the white lights and one for the amber lights; scroll through product images to see)

AL Offroad Tent Mounts

Our Tent Mounts will be a great addition to your roof rack. Allowing mounting to a wide majority of Roof Top Tents

• Stainless Steel Hardware
• Sold in pairs
• Brackets are powder coated

TACOMA GFC ROOF RACK

• The ultralight aerodynamic design remains noise-proof (up to 80 mph in a headwind rainstorm)
• Rust Proof! All racks are composed of a high strength Aluminum with matching brackets and stainless steel bolts
• Notched for multiple tie-down opportunities.
• Slotted for incredible adjustability and aftermarket accessory compatibility.
• Strong enough to mount your trail equipment without failure.
• Toyota Tacoma Roof Racks Lead Time 6-8 weeks after order is placed
• For custom colors contact us via email

Ensure you’re ready for your next adventure or campout by installing a quality Toyota Tacoma Roof Rack.

RIGID Industries Chase Bar

• 27 Pre-Programmed Modes
• Programmable Running And 3 Auxiliary Triggers
• Supports Running, Brake, Reverse, And Turn Signal
• LED Colors: Red, White, Blue, Green And Amber
• Over 300,000 Possible Configurations
• User Defined Programming And Usage
• Sleek Look - No Exterior Hardware
• 9-16VDC
• Pressure Equalizing Vent
• Operating Temperature -40F to 158F, Integrated Thermal Management
• SAE J575 Compliant - Shock/Vibration
• IP68 Compliant - Dust/Water Ingress
• High Grade Aluminum Alloy Housing And Heat Sink
• Over/Under Voltage Protection
• High Impact Polycarbonate Lens
• Reverse Polarity Protection
• Limited Lifetime Warranty
• Off-Road Use Only

Radiance Plus SR-Series

The versatility of the RIGID Radiance lighting family just got even better with the introduction of the Radiance Plus SR-Series. RIGID’s RGB LEDs provide the user with the ability to toggle between eight available back light options with the flip of a switch: Red, Green, Blue, Light Blue, Purple, Amber, White or Rotating. The RIGID Radiance Plus SR-Series single row LED light bar is the perfect solution for those who want RIGID’s legendary quality at a level everyone can attain. Utilizing RIGID’s LED technology, the Radiance Plus light bars feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand. The Radiance Plus SR-Series LED light bars are built with the same sleek low-profile high-grade aluminum alloy housing as the legendary SR-Series, but that’s where the visual similarities end. Inside, the Radiance SR-Series is feature-packed, with a black exposed circuit board, optimized forward projecting Broad Spot optics, prominent RIGID branding plates, and RGB LEDs with seven back light colors. Available in 10, 20, 30, 40 and 50 inch lengths, and fits all existing SR-Series mounting options. Wiring harness and switch sold separately (#40200). The RIGID Radiance Plus SR-Series light bar is for the customer who wants a truly custom look, making it easier than ever to Own The Night.

          FEATURES

• Same Construction As RIGID's SR-Series
• Fits All SR-Series Light Covers And Mounts
• Black Exposed Printed Circuit Board
• 8 Back Lighting Options: Red, Green, Blue, Light Blue, Purple, Amber, White Or Rotating
• 10 Year Warranty
• 9-15 V DC
• Harness And Switch Sold Separately, Part Number 40200
• Back Lighting Independently Controlled Using Switch Logic
• Black Powder Coat Finish
• Pressure Equalizing Vent
• IP68 Compliant - Dust/Water Ingress
• High Grade Aluminum Alloy Housing And Heat Sink
• Over/Under Voltage Protection
• High Impact Polycarbonate Lens
• Mounting Brackets Included
• RFI/EMI Protection
• RoHS Compliant
• Off Road Use Only

Rigid Industries 360-Series 

RIGID introduces the all-new 360-Series family of LED lights. The optimized beam patterns project up to 8,600 raw lumens and are protected by an aluminum housing, features a blacked-out circuit board, prominent RIGID branding, and limited lifetime warranty making them the most robust and useful round lights on the market.

Choose between a 4-inch or 6-inch light, preferred backlight color, and beam pattern for a customized experience and look. RIGID's 360-Series feature beam patterns available from 17 degrees to 60 degrees, offering an option for any application. Available in 4 backlight colors: red, white, blue or amber.

The RIGID 360-Series 4-inch also available in street legal SAE Compliant white and selective yellow. RIGIDs 360-Series round lights seamlessly integrate into multiple OEM applications and makes it easier than ever to Own The Night. Harness sold separately.
Features:

• Back Lighting Independently Controlled
• Available Backlight Colors: Red, White, Blue or Amber
• Stainless Steel Mounting Bracket Included
• Removable Bezel for Color Matching
• Removable Bezel and Side Fairings for OEM Applications
• 9-36 VDC Operation
• Flying Leads for Universal Installation
• Alloy Housing and Heatsink
• Reverse Polarity Protection
• Over/Under Voltage Protection
• IP68 Compliant - Dust/Water Ingress
• Pressure Equalizing Vent
• Black Exposed Printed Circuit Board
• Patented Optics
• 50,000 Hr LED Lifespan
• Wiring Harness Sold Separately
• Limited Lifetime Warranty
• Off Road Use Only
• Size: 4.0 Inch
• Backlight Color: White
• Light Pattern: Diffused
• Watt: 28
• Lumens: 3060
• Series: 360-Series
• Sold As: Pair